Agilent Technologies ENA Series User Manual page 757

Table F-5 Functions of the 8753ES vs. the E5070B/E5071B
Function
Markers Marker search Search function
(cont'd.)
Object of search
Parameters for bandwidth search Bandwidth, bandwidth center
Target value
Target transition type
Search tracking
Marker reading set at a parameter
Reading the marker value (for remote control)
Device test Limit test Limit test table
Offset
Creating a table by using the
GPIB command
Reading the results
Ripple test
Bandwidth test
Analysis Fixture simulator
Appendix F
Replacing the 8753ES with the E5070B/E5071B
8753ES
Maximum, minimum, target value,
bandwidth
Active marker
frequency
Q factor, loss
Definable for an active marker
Not definable
On/Off setting definable for the
active marker (Markers other than
the active marker are always turned
off.)
Values of the start, stop, center, span,
CW frequency, and reference line in
the sweep range
Possible for the active marker
One per channel
Number of segments: Up to 18 per
table
Definable
Create a table by using two or more
commands
Per channel, Per segment
Pass/fail at each point,
Number of points per segment that
failed the maximum/minimum,
Stimulus value at a failed point
Available
Available
Not available
Comparing Functions
E5070B/E5071B
Maximum, minimum, target value,
peak
Arbitrary marker (during remote
control)
Active marker (when manipulating
the front panel)
Bandwidth, bandwidth center
frequency
Upper and lower frequency of the
bandwidth
Q factor, loss
Definable for each marker
Setting of Positive/Negative
transition definable (per marker)
On/Off setting definable for each
marker
Values of the start, stop, center, span,
and reference line in the sweep range
Possible for any marker
One per trace
Number of segments: Up to 100 per
table
Not definable
Create a table by using one
command
Pass/Fail of the active trace on each
channel
Number of failed points
Stimulus value at a failed point
Not available
Not available (Marker search
function can be used for the
bandwidth search.)
Available
751