Agilent Technologies ENA Series User Manual page 531

Step 2. Set channel 1 to the active channel.
Setting Description
Switch the active channel.
Step 3. Check the test ports assigned to ports 1 to 4 in the E5091A properties and connect the
4-port ECal module to those ports.
Figure 15-36 Connecting the 4-port ECal
Step 4. Execute the calibration.
Setting Description
Select full 2-port calibration.
Select the port and execute the calibration.
Chapter 15
Evaluating Transmission Characteristics of a Front End Module
Measurement Examples
Key Operation
Key Operation
2-Port ECal
1-2
525