Connect The Dut; Execute The Measurement; Define The Setup For Display - Agilent Technologies ENA Series User Manual

5. Connect the DUT

The DUT is connected across test ports 1 and 2.
Figure 15-4 Connecting the DUT

6. Execute the Measurement

A trigger is applied to perform the measurement.
Setup Description
Trigger mode: Single

7. Define the Setup for Display

The choice is made between frequency base and order base as the segment display mode.
Setup Description
Segment display: Frequency base or order base
Chapter 15
Measuring the SAW Bandpass Filter Using the Segment Sweep
Measurement Examples
Key Operation
- (Or
Single Continuous
Key Operation
-
Segment Display
|
Frequency Base Order Base
)
-
491