Agilent Technologies ENA Series User Manual page 755

Table F-5 Functions of the 8753ES vs. the E5070B/E5071B
Function
Calibration Defining the Calibration class
(cont'd.) calibration kit
Class indication label
Number of standards that can be
registrated in calibration classes
Type of standard
Standard
parameters
Standard label
ECal Type of calibration
Omission of isolation
Manual THRU measurement
Reading the frequency array
Reading the module information Allowed
Appendix F
Replacing the 8753ES with the E5070B/E5071B
8753ES
S11A (OPEN)
S11B (SHORT)
S11C (LOAD)
S22A (OPEN)
S22B (SHORT)
S22C (LOAD)
Forward Transmission
Forward Match
Reverse Transmission
Reverse Match
Response
Response & Isolation
TRL Thru
TRL Reflect
TRL Line/Match
Editable
Up to seven types
OPEN, SHORT, LOAD, and THRU
Arbitrary Impedance
Common to Offset delay
standards Offset loss
Offset characteristic impedance
Frequency range
Offset type (coaxial, waveguide)
Unique to C0, C1, C2, C3
OPEN
Unique to Not available
SHORT
Unique to Type of standard (fixed, sliding,
LOAD offset)
Unique to Not available
THRU
Arbitrary Type of standard (fixed, sliding)
Impedance Arbitrary Impedance
Editable
Enhanced response calibration
S11 1-port calibration
S22 1-port calibration
Full 2-port calibration
Allowed
Allowed
Allowed
Comparing Functions
E5070B/E5071B
OPEN
SHORT
LOAD
THRU
(OPEN, SHORT, and LOAD are set
for each port; THRU is set between
ports)
TRL Thru
TRL Reflect
TRL Line/Match
Not editable
One type
OPENOPEN, SHORT, LOAD, and
THRU
Arbitrary Impedance, None
←
←
L0, L1, L2, L3
Not available (the type of standard is
treated as fixed load.)
←
Arbitrary Impedance
←
Enhanced response calibration
Response (thru) calibration
Full 1-port calibration
Full 2-port calibration
Full 3-port calibration (Opts.
313/314/413/414)
Full 4-port calibration (Opts.
413/414)
←
Not allowed
Not allowed
Not allowed
749