Agilent Technologies ENA Series User Manual page 13

Documentation Map
The following manuals are available for the Agilent E5070B/E5071B.
•
•
•
•
NOTE The number position shown by "x" in the part numbers above indicates the edition number.
This convention is applied to each manual, CD-ROM (for manuals), and sample programs
disk issued.
User's Guide (Part Number E5070-904x0, attached to Option ABA)
This manual describes most of the basic information needed to use the
E5070B/E5071B. It provides a function overview, detailed operation procedure for
each function (from preparation for measurement to analysis of measurement results),
measurement examples, specifications, and supplemental information. For
programming guidance on performing automatic measurement with the
E5070B/E5071B, please see the Programming Manual.
Installation and Quick Start Guide (Part Number E5070-900x1, attached to Option
ABA)
This manual describes installation of the instrument after it is delivered and the basic
procedures for applications and analysis. Refer to this manual when you use the
E5070B/E5071B for the first time.
Programmer's Guide (Part Number E5070-900x2, attached to Option ABA)
This manual provides programming information for performing automatic
measurement with the E5070B/E5071B. It includes an outline of remote control,
procedures for detecting measurement start (trigger) and end (sweep end), application
programming examples, a command reference, and related information.
VBA Programmer's Guide (Part Number E5070-900x3, attached to Option ABA)
This manual describes programming information for performing automatic
measurement with internal controller. It includes an outline of VBA programming,
some sample programming examples, a COM object reference, and related
information.
7