Agilent Technologies ENA Series User Manual page 663

Key Operation
(Continued)
Fixture Simulator
De-Embedding S4P
Topology
*2
Ports
Sets the ports of the analyzer connected to ports a, b, c and d in Figure 7-6
3-1-2-4
to test ports 3, 1, 2, and 4, respectively.
Sets the ports of the analyzer connected to ports a, b, c and d in Figure 7-6
3-1-4-2
to test ports 3, 1, 4, and 2, respectively.
Sets the ports of the analyzer connected to ports a, b, c and d in Figure 7-6
3-2-1-4
to test ports 3, 2, 1, and 4, respectively.
Sets the ports of the analyzer connected to ports a, b, c and d in Figure 7-6
3-2-4-1
to test ports 3, 2, 4, and 1, respectively.
Sets the ports of the analyzer connected to ports a, b, c and d in Figure 7-6
3-4-1-2
to test ports 3, 4, 1, and 2, respectively.
Sets the ports of the analyzer connected to ports a, b, c and d in Figure 7-6
3-4-2-1
to test ports 3, 4, 2, and 1, respectively.
Sets the ports of the analyzer connected to ports a, b, c and d in Figure 7-6
4-1-2-3
to test ports 4, 1, 2, and 3, respectively.
Sets the ports of the analyzer connected to ports a, b, c and d in Figure 7-6
4-1-3-2
to test ports 4, 1, 3, and 2, respectively.
Sets the ports of the analyzer connected to ports a, b, c and d in Figure 7-6
4-2-1-3
to test ports 4, 2, 1, and 3, respectively.
Sets the ports of the analyzer connected to ports a, b, c and d in Figure 7-6
4-2-3-1
to test ports 4, 2, 3, and 1, respectively.
Sets the ports of the analyzer connected to ports a, b, c and d in Figure 7-6
4-3-1-2
to test ports 4, 3, 1, and 2, respectively.
Sets the ports of the analyzer connected to ports a, b, c and d in Figure 7-6
4-3-2-1
to test ports 4, 3, 2, and 1, respectively.
Returns to the softkey display screen one level higher.
Cancel
Displays the softkey to select the processing (embedding/de-embedding) of the network 1 (nwk1).
Type (nwk1)
Select disabled (not embedded nor de-embedded).
None
Select embedding.
Embed
Select de-embedding.
De-Embed
Returns to the softkey display screen one level higher.
Cancel
Opens the dialog box to read in a 4 port touchstone data file that the user
User File
prepared for the network 1. You can embed/de-embed the network read in
(nwk1)
here.
Displays the softkey to select the processing (embedding/de-embedding) of the network 2 (nwk2).
Type (nwk2)
Select disabled (not embedded nor de-embedded).
None
Select embedding.
Embed
Appendix D
Function
Softkey Functions
Analysis Menu
SCPI Command
:CALC{1-16}:FSIM:EMB:TOP:C:POR
T 3,1,2,4
:CALC{1-16}:FSIM:EMB:TOP:C:POR
T 3,1,4,2
:CALC{1-16}:FSIM:EMB:TOP:C:POR
T 3,2,1,4
:CALC{1-16}:FSIM:EMB:TOP:C:POR
T 3,2,4,1
:CALC{1-16}:FSIM:EMB:TOP:C:POR
T 3,4,1,2
:CALC{1-16}:FSIM:EMB:TOP:C:POR
T 3,4,2,1
:CALC{1-16}:FSIM:EMB:TOP:C:POR
T 4,1,2,3
:CALC{1-16}:FSIM:EMB:TOP:C:POR
T 4,1,3,2
:CALC{1-16}:FSIM:EMB:TOP:C:POR
T 4,2,1,3
:CALC{1-16}:FSIM:EMB:TOP:C:POR
T 4,2,3,1
:CALC{1-16}:FSIM:EMB:TOP:C:POR
T 4,3,1,2
:CALC{1-16}:FSIM:EMB:TOP:C:POR
T 4,3,2,1
:CALC{1-16}:FSIM:EMB:NETW1:TYP
E NONE
:CALC{1-16}:FSIM:EMB:NETW1:TYP
E EMB
:CALC{1-16}:FSIM:EMB:NETW1:TYP
E DEEM
:CALC{1-16}:FSIM:EMB:NETW1:FIL
:CALC{1-16}:FSIM:EMB:NETW2:TYP
E NONE
:CALC{1-16}:FSIM:EMB:NETW2:TYP
E EMB
657