Powering On - Agilent Technologies ENA Series User Manual

Rf network analyzers

Hide thumbs Also See for ENA Series:

Table of Contents

As shown in Figure 14-2, connect the N-type cable between the front panel of the

E5070B/E5071B and that of the E5091A. Make the connection so that the numbers of the

test ports of the E5070B/E5071B and those of the interconnection ports of the E5091A

Connection between E5070B/E5071B and E5091A (front view)

Powering on

After connecting the E5070B/E5071B and the E5091A, follow these steps to power both

Step 1. Turn on the E5070B/E5071B and the E5091A.

Step 2. Immediately after power-on, all of the port connection indicator LEDs of the E5091A go

on. Then, after the E5070B/E5071B detects the E5091A, the LEDs that indicate the

connected test ports remain on.

If the E5070B/E5071B is not powered on or if the E5070B/E5071B and the E5091A are

not connected via the USB cable, all of the LEDs stay on.

Controlling E5091A

Connecting E5070B/E5071B and E5091A

E5070b E5071b