Servo Drive Specifications; General Specifications; Characteristics - Omron R88D-KN series User Manual

3 Specifications
3-1

Servo Drive Specifications

Select a Servo Drive that matches the Linear motor to be used.
3-1-1

General Specifications

Item
Ambient operating temperature and operating
humidity
Storage ambient temperature and humidity
Operating and storage atmosphere
Vibration resistance
Insulation resistance
Dielectric strength
Protective structure
EC Directives EMC Directive
Low Voltage Directive
UL standards
CSA standards
Functional safety
Note 1 The above items reflect individual evaluation testing. The results may differ under compound conditions.
2 Never perform dielectric strength or other megameter tests on the Servo Drive. Failure to follow this guideline may
result in damaging the internal elements.
3 Depending on the operating conditions, some Servo Drive parts will require maintenance. For details, refer to 12-5
Periodic Maintenance on page 12-28.
3-1-2

Characteristics

100-VAC Input Models
Item
Input power supply Main
circuit
Control
circuit
Weight
Maximum motor Rated effective current of motor
capacity
Maximum current of motor
*1 The heat value is given for rated operation.
3-2
0 to 55C, 20 to 85% max. (with no condensation)
20 to 65C, 20 to 85% max. (with no condensation)
No corrosive gases
10 to 60 Hz and at an acceleration of 5.88 m/s
resonance point)
Between power supply terminals/power terminals and FG terminal: 0.5 M min. (at 500 VDC)
Between power supply/power line terminals and FG terminal: 1,500 VAC for 1 min at 50/60 Hz
Built into panel
EN 55011/A2:2007(CISPR11), EN 61000-6-2:2005, EN 61800-3:2004
EN 61800-5-1:2007
UL 508C (File No.E164620)
CSA22.2 No. 14
EN954-1:1996 Cat. 3, EN ISO13849-1:2008 PL c, PL d (MTTFd= 85.9 years, DCavg=
87.5 %), EN61508:2001(Part 1,2,4) SIL2, EN62061:2005 SIL2, EN61800-5-2:2007
(STO), IEC61326-3-1:2008
R88D-KN01L-ECT-L
Power supply capacity
Power supply voltage
Rated current
*1
Heat value
Power supply voltage
*1
Heat value
G5 Series AC Servo Drives With Built-in EtherCAT Communications, Linear Motor Type
Specifications
2
or less (Not to be run continuously at a
R88D-KN02L-ECT-L
0.4 KVA 0.5 KVA
Single-phase 100 to 120 VAC (85 to 132 V) 50/60 Hz
2.6 A 4.3 A
16.6 W 21 W
Single-phase 100 to 120 VAC (85 to 132 V) 50/60 Hz
4 W 4 W
Approx. 0.8 kg Approx. 1.0 kg
1.7 Arms 2.5 Arms
5.1 Arms 7.5 Arms
R88D-KN04L-ECT-L
0.9 KVA
7.6 A
25 W
4 W
Approx. 1.6 kg
4.6 Arms
13.8 Arms