Omron R88D-KN series User Manual page 522

Appendicies
Event name Object Corrupted
Meaning The checksum data in non-volatile memory is corrupted.
Source EtherCAT Master Function Module
Error attributes Level
Effects User program
Indicators EtherNet/IP NET RUN
---
System-defined Variable
variables
None
Cause and Assumed cause
correction
Non-volatile memory failure
Attached None
information
Precautions/ "37" is displayed on the Servo Drive front panel and F237 is given as the AlarmCode (4001 hex).
Remarks
Event name Motor Setting Error
Meaning Settings associated with the motor and external encoder are missing.
Source EtherCAT Master Function Module
Error attributes Level
Effects User program
Indicators EtherNet/IP NET RUN
---
System-defined Variable
variables
None
Cause and Assumed cause
correction
Settings associated with the motor
and external encoder are missing.
Attached None
information
Precautions/ "50" is displayed on the Servo Drive front panel and F060 is given as the AlarmCode (4001 hex).
Remarks
A-122
Source details
Minor fault Recovery
Continues. Operation
EtherNet/IP NET ERR
---
Data type
---
Remedy
Replace the Servo Drive.
Source details
Minor fault Recovery
Continues. Operation
EtherNet/IP NET ERR
---
Data type
---
Remedy
Check the specifications of the motor
and external encoder and provide the
required settings.
G5 Series AC Servo Drives With Built-in EtherCAT Communications, Linear Motor Type
Event code 14AD0000 hex
Slave Detection
timing
Error reset (after Log category
cycling slave
power)
Power drive circuit is OFF for relevant slave.
EtherNet/IP LINK/ACT
---
Name
---
Prevention
None
Event code 28010000 hex
Slave Detection
timing
Error reset (after Log category
cycling slave
power)
Power drive circuit is OFF for relevant slave.
EtherNet/IP LINK/ACT
---
Name
---
Prevention
Check the specifications of the motor
and external encoder and provide the
required settings.
When
establishing
communications
after turning ON
power to the
slave
System
Continuously
System