Omron R88D-KN series User Manual page 18

Safety Precautions
Precautions for Safe Use of This Product
• Illustrations contained in this manual sometimes depict conditions without covers and safety shields for the pur-
pose of showing the details. When using this product, be sure to install the covers and shields as specified and
use the product according to this manual.
• If the product has been stored for an extended period of time, contact your OMRON sales representative.
Be sure to ground the frame ground terminals of the Servo Drive and Servomotor to 100 
or less for the Servo Drives with 100VAC or 200VAC. For the Servo Drive and Servomotor
of 400VAC, ground the frame ground terminals to Electric shock may result.
Never touch the parts inside the Servo Drive.
Electric shock may result.
While the power is supplied, do not remove the front cover, terminal covers, cables, and
options.
Electric shock may result.
Installation, operation, and maintenance or inspection by unauthorized personnel is
prohibited.
Electric shock or injury may result.
Before carrying out wiring or inspection, turn OFF the main circuit power and wait for at
least 15 minutes.
Electric shock may result.
Do not damage, pull, stress strongly, or pinch the cables or place heavy articles on them.
Electric shock, stopping of Servo Drive operation, or burn damage may result.
Do not use the cable when it is laying in oil or water.
Electric shock, injury, or fire may result.
Do not perform wiring or any operation with wet hands.
Electric shock, injury, or fire may result.
Never connect a commercial power supply directly to the Servomotor.
Fire or failure may result.
Never touch the Linear Motor during operation.
Injury may result.
Never modify the Servo Drive.
Injury or equipment damage may result.
16
DANGER
G5 Series AC Servo Drives With Built-in EtherCAT Communications, Linear Motor Type