Servo Drive Specifications; General Specifications - Omron R88M-K User Manual

3 Specifications
3-1

Servo Drive Specifications

Select a Servo Drive that matches the Servomotor to be used. Refer to 2-3-3 Servo Drive and
Servomotor Combination Tables on page 2-14.
3-1-1

General Specifications

Item
Ambient operating temperature and
operating humidity
Storage ambient temperature and
humidity
Operating and storage atmosphere
Vibration resistance
Insulation resistance
Dielectric strength
Protective structure
EC Directives EMC Directive
Low Voltage
Directive
Machinery
Directive
UL standards
CSA standards
Korean Radio Regulations (KC)
Note 1 The above items reflect individual evaluation testing. The results may differ under compound conditions.
2 Never perform dielectric strength or other megameter tests on the Servo Drive. Failure to follow this guideline may
result in damaging the internal elements.
3 Some Servo Drive parts will require maintenance. For details, refer to 12-5 Periodic Maintenance on page 12-36.
3-2
0 to 55°C, 90% max. (with no condensation)
−20 to 65°C, 90% max. (with no condensation)
No corrosive gases
10 to 60 Hz and at an acceleration of 5.88 m/s
a resonance point)
Between power supply terminals/power terminals and FG terminal: 0.5 MΩ min. (at
500 VDC)
Between power supply/power line terminals and FG terminal: 1,500 VAC for 1 min at
50/60 Hz
Built into panel
EN 55011, EN 61000-6-2, IEC 61800-3
EN 61800-5-1
EN954-1 (Category 3), EN ISO 13849-1: 2008 (Category 3) (PLc,d), ISO 13849-1:
2006 (Category 3) (PLc,d), EN61508 (SIL2), EN62061 (SIL2), EN61800-5-2 (STO),
IEC61326-3-1 (SIL2)
UL 508C
CSA22.2 No. 14
Compliant
G5-series AC Servomotors and Servo Drives User's Manual (with Built-in EtherCAT Communications)
Specifications
2
or less (Not to be run continuously at