Rep 12.14 Stapler Assembly - Xerox Phaser 4600 Service Manual

REP 12.14 Stapler Assembly

Parts List on PL 12.45 Item 1
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Separate the Finisher from the printer,
2. Remove the right cover, REP 12.11.
3. Disconnect P/J122 and P/J123 from the Stapler Assembly,
Figure 1 Disconnect the Stapler Assembly
4. Remove 2 screws (metal) that secure the Stapler to the bracket,
4 Repairs and Adjustments
REP 12.14
WARNING
GP 14.
Figure 1.
Figure 2.
Figure 2 Remove the stapler bracket
04/2016
4-142 Phaser 4600/4620/4622 Printer Service Manual
Revised