Rep 1.13 I/O Access Door; Rep 1.14 Waste Tray Cover - Xerox ColorQube 8570 Service Manual

REP 1.13 I/O Access Door

Parts List on PL 1.1 Item 13
Removal
1. From the rear of the printer, pry the I/O Access Door outward while pushing it towards the
front and remove the Access Door.
Figure 1 Removing the I/O Access Door
Repairs and Adjustments
REP 1.13, REP 1.14

REP 1.14 Waste Tray Cover

Parts List on PL 1.1 Item 14
Removal
1. Remove the Control Panel Cover
2. Remove the Left Side Cover
3. Remove the Right Side Cover
4. Remove the Exit Cover (REP
5. Remove the Ink Loader (REP
6. Remove the Printhead (REP
7. Remove the Waste Tray (REP
8. From the left side of the printer, remove the KL-Clip.
9. Remove the X-Axis Bias Spring
October 2012
4-12
(REP 1.5).
(REP 1.10).
(REP 1.11).
1.7).
1.8).
2.3).
1.15).
Figure 1 Removing the KL-Clip
(REP 2.24).
Revised, 3rd Revision - Xerox Internal Use Only
ColorQube 8570/8870 Service Manual