Replacement
Replacement is the reverse of the removal procedure.
NOTE: Insert the guide boss through the hole of the SUB PWB, then press the SUB PWB into
the guide boss until the hook latches,
Figure
Figure 5 SUB PWB replacement
Repairs - Adjustments
REP 1.2, REP 2.1
5.
REP 2.1 Front Cover
Parts List on
PL 2.1
Removal
1.
Switch off the machine, then disconnect the power cord.
2.
Remove the Left and Right Side Covers,
3.
Disconnect the wire harness to the Front Cover,
Figure 1 Front Cover P/J Connector
July 2019
4-6
REP
2.2.
Figure
1.
Connector
Xerox® B210 Service Manual
Initial Release