Rep 1.3 Top Cover - Xerox Phaser 3052 Service Manual

REP 1.3 Top Cover

Parts List on PL 3.1
Removal
1. Switch Off the Printer and disconnect the Power Cord.
2. Remove the following covers:
a. Remove the Left and Right Side Covers
b. Remove the Front Cover (REP
c. Remove the Rear Cover (REP
3. Disconnect the Control Panel connector from the Main PWB
For a Phaser 3052 also disconnect the WNPC (WiFi) connector.
Control Panel Connector
Figure 1 Main PWB Connectors to Disconnect
4. Remove the Top Cover screws (2) at the front of the printer
Repairs
REP 1.3
(REP 1.2).
1.1).
1.4).
(Figure 1).
WNPC (WiFi) Connector
(Figure 2).
Figure 2 Top Cover Screws (Front View)
5. Release the Latch Hooks (2) at the rear of the printer, and remove the Top Cover
3).
June 2014
4-6
Screws
Xerox® Phaser® 3052/3260 Service Manual
(Figure