Rename - Dell S4810 Reference Manual

Version 9.0.2.0
Version 9.1(0.0)
Version
8.3.19.0
Usage Include the colon (:) when entering this command. This command checks the
Information specified flash memory for errors. If errors are found, the command recommends
that you format the flash.
Related
•
Commands
•

rename

Rename a file in the local file system.
S4810
Syntax
rename url url
Parameters
url
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
File Management
Introduced on the S6000.
Introduced on S4810 and Z9000.
Introduced on S4820T.
CAUTION: If you elect to format the flash, all files – including the startup
configuration file – are lost. If you do decide to format the specified flash,
consider saving the running configuration as the startup configuration after
formatting the flash (use the write memory command or copy run start
command).
copy — copy one file to another location.
show file-systems — Display information about the file systems on the system.
Enter the following keywords and a filename:
• For a file on the internal Flash, enter flash:// followed
by the filename.
• For a file on an external USB drive, enter usbflash://
followed by the filename.
Introduced on the S6000.
Introduced on the S4820T.
71