Show Voice Vlan - Dell N1100-ON Reference Manual

Example
console(config)#interface gigabitethernet 1/0/1
console(config-if-Gi1/0/1)#voice vlan data priority untrust
console(config-if-Gi1/0/1)#voice vlan data priority trust

show voice vlan

This command displays information about the voice VLAN.
Syntax
show voice vlan [interface {gigabitethernet unit/slot/port |
tengigabitethernet unit/slot/port | fortygigabitethernet unit/slot/port}|all]
Command Mode
Privileged Exec, Global Configuration mode and all Configuration submodes
User Guidelines
When the interface parameter is not specified, only the global mode of the
•
voice VLAN is displayed.
• When the interface parameter is specified, the following is displayed:
Output Description
Interface
Voice VLAN
Interface Mode
Voice VLAN ID
Voice VLAN Priority The 802.1p priority for the voice VLAN on the port. This is only
Voice VLAN
Untagged
Voice VLAN COS
Override
Voice VLAN Status The operational status of voice VLAN on the port.
When the all parameter is used for the interface, all interfaces are displayed.
The interface ID.
The admin mode of the voice VLAN on the interface.
The voice VLAN ID.
displayed if configured.
The tagging option for the voice VLAN traffic.
The Override option for the voice traffic arriving on the port.
Layer 2 Switching Commands
835