Show Ip As-Path-Access-Lists - Dell Z9500 Command Reference Manual

show ip as-path-access-lists

Display the all AS-PATH access lists configured on the E-Series.
Z9500
Syntax
show ip as-path-access-lists
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
6.1.1.0
Example
Dell#show ip as-path-access-lists
ip as-path access-list 1
permit ^$
permit ^\(.*\)$
deny .*
ip as-path access-list 91
permit ^$
deny .*
permit ^\(.*\)$
Dell#
IP Community List Commands
Use the following commands to configure IP community lists on the switch.
334
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the E-Series.
Access Control Lists (ACL)