Show History - Allied Telesis AT-x510-28GTX Command Reference Manual

CLI N C
AVIGATION OMMANDS

SHOW HISTORY

show history
Overview This command lists the commands entered in the current session. The history
buffer is cleared automatically upon reboot.
The output lists all command line entries, including commands that returned an
error.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show history
Syntax
Mode User Exec and Privileged Exec
Example To display the commands entered during the current session, use the command:
awplus#
Output Figure 1-2:
C613-50102-01 REV C
show history
Example output from the show history command
1 en
2 show ru
3 conf t
4 route-map er deny 3
5 exit
6 ex
7 di
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
"Getting Started
Guide.
100