S
C
M
YSTEM
ONFIGURATION AND
BANNER EXEC
banner exec
Overview
This command configures the User Exec mode banner that is displayed on the
console after you login. The banner exec default command restores the User Exec
banner to the default banner. Use the no banner exec command to disable the
User Exec banner and remove the default User Exec banner.
banner exec <banner-text>
Syntax
banner exec default
no banner exec
Default
By default, the AlliedWare Plus™ version and build date is displayed at console
login, such as:
Mode
Global Configuration
Examples
To configure a User Exec mode banner after login, enter the following commands:
To restore the default User Exec mode banner after login, enter the following
commands:
C613-50103-01 REV A
C
ONITORING
OMMANDS
AlliedWare Plus (TM) 5.4.6-1 03/31/14 00:44:25
awplus#configure terminal
awplus(config)#banner exec enable to move to Priv Exec mode
awplus(config)#exit
awplus#exit
awplus login: manager
Password:
enable to move to Priv Exec mode
awplus>
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
211