Figure 7.1 Relation Between The Eternus Dx S3 Series And The Key Server - Fujitsu ETERNUS DX100 S3 Setup Manual

Chapter 7 System Environment Settings
7.1 Required Settings for the Key Management Function
7.1.1.3 Key Group Settings for the RAID Group
(1) Set key group
Register any RAID groups that use the same key from the key server in the key group.
Refer to "Set Key Group (RAID Group)" in "ETERNUS Web GUI User's Guide (Settings)".
(2) SED key group
Check the key group setting status of the RAID group.
Refer to "SED Key Group" in "ETERNUS Web GUI User's Guide (Operation)".
■ Relation between the ETERNUS DX S3 series and the key server
The following figure shows the relation between the ETERNUS DX S3 series and the key server.

Figure 7.1 Relation between the ETERNUS DX S3 series and the key server

Storage System Group Name
Storage system A
Key Management Machine Name #1
Storage system B
Key Management Machine Name #2
Key Group Name
The ETERNUS DX S3 series obtains the key from the key server by using the "Storage System Group Name",
"Key Management Machine Name", and "Key Group Name" as the password.
Key Group Name
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED
Key Server
Device Group Name
(Default name: ETERNUS_DX)
Machine ID
Serial No. for storage system A
Machine ID
Serial No. for storage system B
110
P2X0-1250-06ENZ0