Jeep 1987 Wrangler Workshop Manual page 458

ENGINES
FUEL SYSTEM - BBD CARBURETOR
S E E
I.S.
N
O
T
E
S
Remove the fast idle cam retaining screw.
Remove the fast idle cam, linkage and clip.
Grind the heads off the choke cover rivets.
Remove the choke housing cover, retainers and
the remaining portion of the rivets. Remove the
gasket and baffle.
Remove the choke housing from the throttle
body.
Remove the air horn retaining screws and lift the
air horn (5) straight up and away from the main
body.
Remove the solenoid. Discard the gasket.
Invert the air horn and compress the accelerator
pump drive spring (6).
Remove the S-link from the pump shaft.
Remove the pump assembly.
Remove the fuel inlet needle valve (7), seat (8)
and gasket from the main body.
840222
B-224