Camshaft Installation - Jeep 1987 Wrangler Workshop Manual

Ill
ENGINES
US
Ill
2.46 LITER (150 CID) FOUR-CYLINDER ENGINE
US
Remove the camshaft sprocket retaining bolt.
Rotate the crankshaft until the zero degree (0°)
timing mark on the crankshaft sprocket is
closest to and on the center line with the timing
mark on the camshaft sprocket (A).
84184
Remove the timing chain and sprockets as an
assembly (B).
Remove the camshaft ( C ) .
83109A
CAMSHAFT INSTALLATION
Lubricate the camshaft with AMC Engine Oil
Supplement (EOS), or equivalent.
Install the camshaft carefully to prevent
damaging the camshaft bearings.
Turn the tensioner lever (A) to the unlocked
(DOWN) position.
Pull the tensioner block (B) toward the tensioner
lever to compress the spring. Hold the block and
turn the tensioner lever to the locked (UP)
position.
84185
B-74