Jeep 1987 Wrangler Workshop Manual page 289

ENGINES
2.46 LITER (150 CID) FOUR-CYLINDER ENGINE
100485A
Remove the retainer from the fuel tube and
discard the O-rings, the spacer, and the retainer.
• Install the retainer assembly (G) by pushing
the assembly into the quick-connect fitting (D)
until a "click" is heard.
100486
• Grasp the disposable plug (H) and remove it
from the fitting (D) .
NOTE: By removing ONLY the plastic plug (H),
the O-rings spacer, and retainer will remain in
the fitting .
100487
• Push the fuel line (B) into the fitting (D) until a
"click" is heard and the connection is
complete.
100488
B-i