ENGINES
THROTTLE BODY
INJECTION FUEL SYSTEMS
FUEL INJECTOR REMOVAL
Remove the air inlet bonnet and hose.
Remove the injector wire connector.
Remove the injector retainer clip screws.
Remove the injector retainer clip ( 1 ) .
Using a pair of small pliers, gently grasp the
center collar of the injector (between electrical
terminals) and carefully remove the injector (2)
with a lifting-twisting motion.
Discard the upper (3) and lower (4) O-rings.
Note that the backup ring (5) fits over the upper
O-ring ( 3 ) .
83038
B-201