Sending Unit/Fuel Pump Removal; Sending Unit/Fuel Pump Installation - Jeep 1987 Wrangler Workshop Manual

ENGINES
am
THROTTLE BODY INJECTION FUEL SYSTEMS
am
Slip
j.g.;#fc:
v
::r
S E E
I.S.
N
O
T
E
S
SENDING UNIT/FUEL PUMP (Til MODELS)
REMOVAL
Disconnect the battery cables.
Remove the fuel from the tank.
Position a jack beneath the fuel tank.
Remove the fuel tank as outlined above and
lower the tank gradually with the jack.
Turn the fuel gauge sending unit retainer ring (C)
with a screwdriver and remove.
101287
Separate the sending unit (1) and pump (2)
(TBI MODELS).
SENDING UNIT/FUEL PUMP (TBI MODELS)
INSTALLATION
Connect the fuel pump (2) to the sending unit (1)
(TBI MODELS).
Install the sending unit/pump assembly in the
tank and secure with the retaining ring (C).
NOTE: Ensure O-ring is properly positioned in
its groove.
Connect the hoses.
Install the fuel tank as outlined above.
Connect the battery cables.
N O T E : T h e fuel tank is e q u i p p e d with a
pressure/vacuum filler cap.