Spare Tire Removal; Jacking Instructions - Jeep Wrangler 2024 Owner's Handbook Manual

Hide thumbs Also See for Wrangler 2024:
Table of Contents

Advertisement

2. Remove the hardware storage cover by pinch-
ing the latch on the left side and pulling
upward.
Hardware Storage Cover Latch
3. Turn the plastic wing nut counterclockwise to
loosen the jack from the storage bin.
Plastic Wing Nut Location
4. Remove tool kit and assemble tools.
58
EMERGENCY

SPARE TIRE REMOVAL

1. To remove the spare tire from the carrier,
remove the tire cover, if equipped.
2. Remove the Rear Camera Cover by turning the
lock bolt counterclockwise with the #T40 torx
head driver and ratchet from the supplied tool
kit.
Unlock Rear Camera Cover
3. Remove the lug nuts with the lug wrench turn-
ing them counterclockwise. If equipped,
remove the locking lug nut with the lock key
(located in the glove box) turning it
counterclockwise.
Removing The Spare Tire

JACKING INSTRUCTIONS

WARNING!
Carefully follow these tire changing warnings to
help prevent personal injury or damage to your
vehicle:
Always park on a firm, level surface as far
from the edge of the roadway as possible
before raising the vehicle.
Turn on the Hazard Warning Flashers.
Apply the parking brake firmly and shift an
automatic transmission into PARK; a manual
transmission into REVERSE.
Block the wheel diagonally opposite the
wheel to be raised.
Never start or run the engine with the vehicle
on a jack.
(Continued)

Advertisement

Table of Contents
loading

Table of Contents