Jeep 1987 Wrangler Workshop Manual page 123

WELDED COMPONENTS
BODY REPAIR INFORMATION
Wipe the front and rear machined surfaces
clean with a shop towel.
Place the level (1) on the machined surface at
the front of the bench.
Move the level to the machined surface at the
rear of the bench.
The level must be at the adjustable leg (C) side
of the bench.
NOTE: Place the level on the adjustable leg (C)
side of the bench.
Turn the adjustment screw (B) until the level
bubble is centered between the two
graduations.
S E E
I.S.
N
O
T
E
S
100448
S-21