Jeep 1987 Wrangler Workshop Manual page 170

WELDED COMPONENTS
" « T l — A .
'. T T " ^ - > 0 /
SIDE BODY PANEL COLLISION REPAIR
101467
INSTALLATION
Place the replacement panel (L) in the install-
ed position and retain it with locking pliers.
Weld the replacement panel in (M) position as
shown.
101468
Apply body solder to the buttweld and finish
the existing contours.
Sealing
Refer to Chapter R — SEALING.
Corrosion Protection/Painting
Refinish the quarter panel and vehicle body as
necessary.
Refer to Chapter T - PAINT AND TRIM.
Install all remaining detachable components
that were removed.
S-68