Min_Time> ::= Seconds In Nr3; Trigger:tv:udtv:pgthan - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

31
:TRIGger Commands

:TRIGger:TV:UDTV:PGTHan

Command Syntax
:TRIGger:TV:UDTV:PGTHan <min_time>
<min_time> ::= seconds in NR3 format
The :TRIGger:TV:UDTV:PGTHan command specifies the "greater than the
sync pulse width" time in the Generic video trigger. This setting allows
oscilloscope synchronization to the vertical sync.
This command is available with the DSOX3VID extended Video triggering
license.
Query Syntax
:TRIGger:TV:UDTV:PGTHan?
The :TRIGger:TV:UDTV:PGTHan query returns the "greater than the sync
pulse width" time setting.
Return Format
<min_time><NL>
<min_time> ::= seconds in NR3 format
See Also
•
•
•
952
(see page 1138)
":TRIGger:TV:STANdard"
":TRIGger:TV:UDTV:ENUMber"
":TRIGger:TV:UDTV:HSYNc"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 948
on page 949
on page 950