Trigger:tv:udtv:htime - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:TRIGger:TV:UDTV:HTIMe

Command Syntax
:TRIGger:TV:UDTV:HTIMe <time>
<time> ::= seconds in NR3 format
When the Generic video trigger's horizontal sync control is enabled, the
:TRIGger:TV:UDTV:HTIMe command sets the minimum time the horizontal
sync pulse must be present to be considered valid.
This command is available with the DSOX3VID extended Video triggering
license.
Query Syntax
:TRIGger:TV:UDTV:HTIMe?
The :TRIGger:TV:UDTV:HTIMe query returns the horizontal sync time
setting.
Return Format
<time><NL>
<time> ::= seconds in NR3 format
See Also
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
":TRIGger:TV:STANdard"
":TRIGger:TV:UDTV:HSYNc"
on page 948
on page 950
31
:TRIGger Commands
951