Callhome Send Diagnostic - Cisco Nexus 3548 Command Reference Manual

System Management Commands

callhome send diagnostic

To send a specified Call Home test message to all configured destinations, use the callhome send
diagnostic command.
Syntax Description This command has no arguments or keywords.
Command Default
None
Command Modes
Callhome configuration mode
Command History Release
5.0(3)A1(1)
Usage Guidelines
You can generate a test message to test your Call Home communications using the callhome send
diagnostic command.
Examples
This example shows how to configure Call Home to send test messages to all configured destinations:
switch# configure terminal
switch(config)# callhome
switch(config-callhome)# callhome send diagnostic
switch(config-callhome)#
Related Commands Command
show callhome
show running-config
callhome
OL-27851-02
callhome send diagnostic
Modification
This command was introduced.
Description
Displays Call Home configuration information.
Displays the running configuration information for Call Home.
Cisco Nexus 3548 Switch NX-OS System Management Command Reference
callhome send diagnostic
21