Show Rlir - Cisco MDS 9124 - Fabric Switch Reference

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show rlir

To display the information about Registered Link Incident Report (RLIR), Link Incident Record
Registration (LIRR), and Distribute Registered Link Incident Record (DRLIR) frames, use the show rlir
command.
On a Cisco Fabric Switch for HP c-Class BladeSystem and on a Cisco Fabric Switch for IBM
Note
BladeCenter, the syntax differs as follows:
interface {bay port | ext port}
Syntax Description erl vsan-id
vsan vsan-id
history
recent
interface
fc slot/port
bay port | ext port}
portnumber port-number
statistics
Defaults None.
Command Modes EXEC mode.
Command History Release
1.3(2)
3.0(3)
3.1(2)
Usage Guidelines
If available, the host timestamp (marked by the *) is printed along with the switch timestamp. If the host
timestamp is not available, only the switch timestamp is printed.
OL-16217-01, Cisco MDS SAN-OS Release 3.x
show rlir {erl [vsan vsan-id] | history | recent [interface fc slot/port | portnumber port-number]
| statistics [vsan vsan-id]}
Modification
This command was introduced.
Modified the show rlir erl command.
Added the bay port | ext port keywords and arguments.
Displays Established Registration List (ERL) information.
Specifies a VSAN ID. The range is 1 to 4093.
Displays link incident history.
Displays recent link incident.
Specifies an interface.
(Optional) Specifies a Fibre Channel interface on a Cisco MDS 9000
Family Switch.
(Optional) Specifies a Fibre Channel interface on a Cisco MDS 9124
Fabric Switch, a Cisco Fabric Switch for HP c-Class BladeSystem, and a
Cisco Fabric Switch for IBM BladeCenter.
Specifies a port number for the link incidents. The range is 1 to 224.
Displays RLIR statistics.
Cisco MDS 9000 Family Command Reference
show rlir
22-291