Show Fcdomain - Cisco MDS 9124 - Fabric Switch Reference

show fcdomain

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show fcdomain
To display the Fibre Channel domain (fcdomain) information, use the show fcdomain command.
Note On a Cisco Fabric Switch for HP c-Class BladeSystem and on a Cisco Fabric Switch for IBM
BladeCenter, the syntax differs as follows:
interface {bay port | ext port}
Syntax Description address-allocation
cache
allowed
domain-list
fcid persistent
pending
pending-diff
session-status
vsan vsan-id
statistics
interface
fc slot/port
bay port | ext port
fcip fcip-id
iscsi slot/port
port-channel number
status
Cisco MDS 9000 Family Command Reference
22-76
show fcdomain [address-allocation [cache] |
allowed |
domain-list |
fcid persistent [unused] |
pending [vsan vsan-id] |
pending-diff [vsan vsan-id] |
session-status [vsan vsan-id] |
statistics [interface {fc slot/port [vsan vsan-id] | fcip fcip-id [vsan vsan-id] | iscsi slot/port} |
port-channel [vsan vsan-id]] |
status |
vsan vsan-id]
Displays statistics for the FC ID allocation.
Reassigns the FC IDs for a device (disk or host) that exited and reentered
the fabric for the principal switch. In the cache content, VSAN refers to
the VSAN that contains the device, WWN refers to the device that owned
the FC IDs, and mask refers to a single or entire area of FC IDs.
Displays a list of allowed domain IDs.
Displays a list of domain IDs granted by the principal switch.
Displays persistent FC IDs (across reboot)
Displays the pending configuration.
Displays the difference between the running configuration and the
pending configuration.
Displays the last action performed by FC domain.
Specifies a VSAN ID. The range is 1 to 4093.
Displays the statistics of FC domain
Specifies an interface.
(Optional) Specifies a Fibre Channel interface on a Cisco MDS 9000
Family Switch.
(Optional) Specifies a Fibre Channel interface on a Cisco MDS 9124
Fabric Switch, a Cisco Fabric Switch for HP c-Class BladeSystem, and a
Cisco Fabric Switch for IBM BladeCenter.
Specifies an FCIP interface. The range is 1 to 255.
Specifies an iSCSI interface.
Specifies a PortChannel interface. The range is 1 to 128.
Displays all VSAN-independent information in FC domain.
Chapter 22 Show Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x