Port-Security Commit - Cisco MDS 9124 - Fabric Switch Reference

port-security commit

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
port-security commit
To apply the pending configuration pertaining to the port security Cisco Fabric Services (CFS)
distribution session in progress in the fabric, use the port-security commit command in configuration
mode.
Syntax Description
vsan vsan-id
Defaults None.
Command Modes Configuration mode.
Command History Release
2.0(x)
Usage Guidelines
None.
Examples The following example shows how to commit changes to the active port security configuration.
switch# config terminal
switch(config)# port-security commit vsan 13
Related Commands Command
port-security distribute
show port-security
Cisco MDS 9000 Family Command Reference
18-20
port-security commit vsan vsan-id
Specifies the VSAN ID. The range is 1 to 4093.
Modification
This command was introduced.
Description
Enables CFS distribution for port security.
Displays port security information.
Chapter 18
OL-16217-01, Cisco MDS SAN-OS Release 3.x
P Commands