Fcinterop Fcid-Allocation - Cisco MDS 9124 - Fabric Switch Reference

fcinterop fcid-allocation

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
fcinterop fcid-allocation
To allocate FCIDs on the switch, use the fcinterop fcid-allocation command in configuration mode. To
disable FCIDs on the switch, use the no form of the command.
Syntax Description
auto
flat
none
Defaults
The default is fcinterop fcid-allocation auto.
Command Modes Configuration mode.
Command History Release
1.0(2)
Usage Guidelines
This command defines how the switch assigns FCIDs.
Examples
switch# config terminal
switch(config)# fcinterop fcid-allocation none
switch(config)# fcinterop fcid-allocation flat
switch(config)# fcinterop fcid-allocation auto
Related Commands Command
show flogi database
Cisco MDS 9000 Family Command Reference
8-32
fcinterop fcid-allocation {auto | flat | none}
no fcinterop fcid-allocation {auto | flat | none}
Assigns single FCID to compatible HBAs.
Assign single FCID.
Assigns FCID range.
Modification
This command was introduced.
Description
Displays the fabric login (FLOGI) table.
Chapter 8
OL-16217-01, Cisco MDS SAN-OS Release 3.x
F Commands