Fabric-Binding Database Diff - Cisco MDS 9124 - Fabric Switch Reference

fabric-binding database diff

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
fabric-binding database diff
To view the differences between the active database and the configuration database in a VSAN, use the
fabric-binding database diff command in EXEC mode.
Syntax Description active
config
vsan vsan-id
Defaults None
Command Modes
EXEC mode
Command History Release
1.3(1)
3.0(1)
Usage Guidelines Fabric binding is configured on a per-VSAN basis and can be implemented in both FICON VSANs and
Fibre Channel VSANs.
Examples
The following example displays the differences between the active database and the configuration
database in VSAN 1.
switch# fabric-binding database diff active vsan 1
The following example displays information on the differences between the configuration database and
the active database.
switch# fabric-binding database diff config vsan 1
Related Commands Command
fabric-binding copy
Cisco MDS 9000 Family Command Reference
8-6
fabric-binding database diff {active | config} vsan vsan-id
Provides information on the differences in the active database with respect to
the configuration database.
Provides information on information on the differences in the configuration
database with respect to the active database.
Specifies the VSAN. The ID of the VSAN is from 1 to 4093.
Modification
This command was introduced.
Extended support of fabric binding to Fibre Channel VSANs.
Description
Copies from the active to the config fabric binding database.
Chapter 8
OL-16217-01, Cisco MDS SAN-OS Release 3.x
F Commands