Ssh Server Enable - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

ssh server enable

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
ssh server enable
To enable the SSH server, use the ssh server enable command in configuration mode. To disable the
SSH service, use the no form of the command.
Syntax Description This command has no arguments or keywords.
Defaults
Disabled.
Command Modes
Configuration mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples
The following example enables the SSH server.
switch# config terminal
switch(config)# ssh server enable
updated
The following example disables the SSH server.
switch# config terminal
switch(config)# no ssh server enable
updated
Related Commands Command
show ssh server
ssh key
Cisco MDS 9000 Family Command Reference
21-68
ssh server enable
no ssh server enable
Modification
This command was introduced.
Description
Displays SSH server information.
Generates an SSH key.
Chapter 21 S Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x