Role Name - Cisco Nexus 7000 Series Command Reference Manual

Hide thumbs Also See for Nexus 7000 Series:
Table of Contents

Advertisement

role name

role name
To create or modify a user role or privilege role and enter user role configuration mode, use the role name
command. To delete a user role, use the no form of this command.
role name {role-name| priv-n}
no role name {role-name| priv-n}
Syntax Description
role-name
priv-n
Command Default
None
Command Modes
Global configuration
Command History
Release
5.0(2)
4.0(1)
Usage Guidelines
The Cisco NX-OS software provides four default user roles:
• network-admin—Complete read-and-write access to the entire Cisco NX-OS device (only available in
• network-operator—Complete read access to the entire Cisco NX-OS device (only available in the default
• vdc-admin—Read-and-write access limited to a VDC
• vdc-operator—Read access limited to a VDC
You cannot change or remove the default user roles.
You must follow these guidelines when changing the rules of privilege roles:
• You cannot modify the priv-14 and priv-15 roles.
• You can add deny rules only to the priv-0 role.
Cisco Nexus 7000 Series Security Command Reference
630
the default VDC)
VDC)
User role name. The role-name argument has a
maximum length of 16 characters and is a
case-sensitive, alphanumeric character string.
Specifies the privilege level. The n argument is a
number between 0 and 13.
Modification
The priv-n keyword was added.
This command was introduced.
R Commands

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents