Radius-Server Directed-Request - Cisco MDS 9000 series Command Reference Manual

radius-server directed-request

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
radius-server directed-request
To specify a RADIUS server to send authentication requests to when logging in, use the radius-server
directed-request command. To revert to sending the authentication request to the configured group, use
the no form of the command.
Syntax Description This command has no arguments or keywords.
Defaults Disabled.
Command Modes Configuration mode.
Command History Release
3.0(1)
Usage Guidelines The user can specify the username@servername during login. The user name is sent to the server name
for authentication.
Examples
The following example shows how to specify a RADIUS server to send authentication requests to when
logging in.
switch# config terminal
switch(config)# radius-server directed-request
Related Commands Command
show radius-server
show radius-server
directed request
Cisco MDS 9000 Family Command Reference
20-6
radius-server directed-request
no radius-server directed-request
Modification
This command was introduced.
Description
Displays all configured RADIUS server parameters.
Displays a directed request RADIUS server configuration.
Chapter 20 R Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x