Aaa Authentication Login Password-Aging Enable - Cisco MDS 9124 - Fabric Switch Reference

aaa authentication login password-aging enable

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
aaa authentication login password-aging enable
To configure password aging notifcation from AAA server , use the aaa authentication login
password-aging enable in configuration mode. To revert to factory defaults, use the no form of the
command.
Syntax Description This command has no other arguments or keywords.
Defaults None.
Command Modes
Configuration mode.
Command History Release
3.2(1)
Usage Guidelines Specify the currently configured command preceded by a no in order to revert to the factory defaults.
This command is supported by the TACACS+ protocol. If you try to use the RADIUS protocol by
Note
enabling this feature, RADIUS will generate a SYSLOG message and authentication will fall back to
local.
Examples The following example enables password aging notification from AAA server.
switch# config terminal
switch(config)# aaa authentication login password-aging enable
The following example reverts to the Password Authentication Password (PAP) authentication
method (default)
switch(config)# no aaa authentication login password-aging enable
Related Commands Command
show aaa
authentication login
password-aging
Cisco MDS 9000 Family Command Reference
2-8
aaa authentication login password-aging enable
no aaa authentication login password-aging enable
Modification
This command was introduced.
Description
Displays the status of the password aging notification (enabled/disabled).
Chapter 2 A Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x