Show Class-Map Type Queuing - Cisco Nexus 7000 Series Command Reference Manual

Cisco Nexus 7000 Series NX-OS Quality of Service Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .

show class-map type queuing

To display type queuing class maps, use the show class-map type queuing command.
Syntax Description
class-map-name
Defaults Displays all type queuing class maps if no class map name is specified.
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0
Usage Guidelines
You can display the class-maps referred to in the default policies by using appropriate show commands
of that particular line card type. To get the actual cos2q map, you must prefix the queue type string
in the command. For example, to display in-q1, use the show class-map type queuing 2q4t-in-q1 or
show class-map type queuing 8q2t-in-q1 command.
For a list of the system-defined type queuing class maps, see
This command does not require a license.
Examples
This example shows how to display all type queuing class maps:
switch(config)# show class-map type queuing
Type queuing class-maps
========================
OL-23378-01
show class-map type queuing [class-map-name]
(Optional) Named class map.
Modification
This command was introduced.
class-map type queuing match-any 2q4t-in-q1
Description: Classifier for ingress queue 1 of type 2q4t
match cos 5-7
class-map type queuing match-any 2q4t-in-q-default
Description: Classifier for ingress default queue of type 2q4t
match cos 0-4
class-map type queuing match-any 8q2t-in-q1
Description: Classifier for ingress queue 1 of type 8q2t
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
show class-map type queuing
Table 1.
QOS-91