Class (Policy Map Type Qos) - Cisco Nexus 7000 Series Command Reference Manual

Cisco Nexus 7000 Series NX-OS Quality of Service Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .

class (policy map type qos)

To add a reference to an existing qos class map in a policy map and enter the class mode, use the class
command. To remove a class from the policy map, use the no form of this command.
Syntax Description
type qos
class-map-name
qos-dynamic
class-default
insert-before
before-class-map-name
Defaults
None
Command Modes Policy map type qos configuration
Supported User Roles network-admin
vdc-admin
Command History Release
4.0
4.2(1)
Usage Guidelines Policy actions in the first class that matches the traffic type are performed.
This command does not require a license.
Examples
This example shows how to add a reference to a class map at the end of a policy map:
switch(config)# policy-map my_policy1
switch(config-pmap)# class traffic_class2
switch(config-pmap-c-qos)#
OL-23378-01
class [type qos] {class-map-name | qos-dynamic | class-default} [insert-before [type qos]
before-class-map-name]
no class {class-map-name | class-default}
(Optional) Specifies the component type, which is qos for this class. By
default, the type is qos.
Reference to a class map.
Specifies already configured class maps.
Specifies the reserved class name that matches all traffic not classified in
other classes in a policy map.
(Optional) Specifies the position of this class in the policy. If not specified,
the class is placed at the end of the classes in the policy. Policy actions in
the first class that matches the traffic type are performed.
Modification
This command was introduced.
The qos-dynamic variable was added.
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
class (policy map type qos)
QOS-7