Show Mac Address-Table - Cisco Small Business 300 1.1 Series Administration Manual

Address Table Commands
78-20269-01 Command Line Interface Reference Guide
Console(config-if)#

27.23 show mac address-table

Use the show mac address-table EXEC command to view entries in the MAC
address table.
Syntax
show mac address-table
interface-id] [address mac-address]
Parameters
•
dynamic—Displays only dynamic MAC address table entries.
•
static—Displays only static MAC address table entries.
•
secure—Displays only secure MAC address table entries.
•
vlan—Specifies VLAN, such as VLAN 1.
•
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or port-channel.
•
mac-address—MAC address.
Default Configuration
If no parameters are entered, the entire table is displayed.
Command Mode
EXEC mode
User Guidelines
Internal usage VLANs (VLANs that are automatically allocated on routed ports) are
presented in the VLAN column by a port number and not by a VLAN ID.
port security max 20
[dynamic | static| secure] [vlan vlan] [interface
27
348