Show Ip Ospf Asbr - Dell Z9500 Command Reference Manual

Line Beginning
with
"Min LSA...."
"Number of..."
Example
Dell#show ip ospf 10
Routing Process ospf 10 with ID 1.1.1.1 Virtual router default-
vrf
Supports only single TOS (TOS0) routes
SPF schedule delay 5 secs, Hold time between two SPFs 10 secs
Convergence Level 0
Min LSA origination 0 msec, Min LSA arrival 1000 msec
Min LSA hold time 5000 msec, Max LSA wait time 5000 msec
Number of area in this router is 1, normal 1 stub 0 nssa 0
Dell#
Related
show ip ospf database
Commands
show ip ospf interface
show ip ospf neighbor

show ip ospf asbr

Display all autonomous system boundary router (ASBR) routers visible to OSPF.
Z9500
Syntax
show ip ospf process-id asbr
Parameters
process-id
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1298
Description
Displays the intervals set for LSA transmission and
acceptance.
Displays the number and type of areas configured for this
process ID.
Area BACKBONE (0)
Number of interface in this area is 1
SPF algorithm executed 205 times
Area ranges are
— displays information about the OSPF routes configured.
— displays the OSPF interfaces configured.
— displays the OSPF neighbors configured.
Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first
OSPF process.
EXEC
EXEC Privilege
Open Shortest Path First (OSPFv2 and OSPFv3)