Radius-Server Deadtime - Dell Z9500 Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

Not configured.

CONFIGURATION

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

radius-server deadtime

Configure a time interval during which non-responsive RADIUS servers to authentication requests are

radius-server deadtime seconds

Enter the following keywords and slot/port or number

information:

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

For a Loopback interface, enter the keyword loopback

then a number from 0 to 16383.

For a port channel interface, enter the keywords port-

channel then a number. The range is from 1 to 512.

For a Null interface, enter the keyword null then the Null

interface number.

For a VLAN interface, enter the keyword vlan then a

number from 1 to 4094.

Introduced on the S6000–ON.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Added support for 4-port 40G line cards on ExaScale.

Introduced on the S4810.

Introduced on the S-Series.

Introduced on the C-Series.

Introduced on the E-Series.