Acct-Port - Dell PowerConnect 6224 Command Line Interface Manual

aaa accounting network default start-stop group
radius
Use the aaa accounting network default start-stop group radius command to
enable RADIUS accounting on the switch. Use the "no" form of this
command to disable RADIUS accounting.
Syntax
aaa accounting network default start-stop group radius
no aaa accounting network default start-stop group radius
Default Configuration
RADIUS accounting is disabled by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#aaa accounting network default start-
stop group radius

acct-port

Use the acct-port command to set the port that connects to the RADIUS
accounting server. Use the "no" form of this command to reset the port to the
default.
Syntax
port
acct-port
no acct-port
port — The layer 4 port number of the accounting server (Range: 1 -
•
65535).
500
RADIUS Commands