Acct-Port - Dell N1100-ON Reference Manual

auth-port
deadtime
key
msgauth
name (RADIUS server)

acct-port

Use the acct-port command to set the port on which the RADIUS accounting
server listens for connections. Use the no form of this command to reset the
port to the default.
Syntax
acct-port port
no acct-port
• port — The layer 4 port number of the accounting server (Range: 1 -
65535).
Default Configuration
The default value of the port number is 1813.
Command Mode
RADIUS Server Accounting mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets port number 56 for accounting requests.
console(config)#radius-server host acct 3.2.3.2
console(Config-acct-radius)#acct-port 56
radius-server attribute 31
radius-server deadtime
radius-server host
radius-server key
radius-server retransmit
source-ip
timeout
usage
–
–
Security Commands
908