Syntax
aaa accounting network default start-stop group radius
no aaa accounting network default start-stop group radius
Default Configuration
RADIUS accounting is disabled by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#aaa accounting network default start-stop group
radius
acct-port
Use the acct-port command to set the port that connects to the RADIUS accounting server.
Use the "no" form of this command to reset the port to the default.
Syntax
port
acct-port
no acct-port
port — The layer 4 port number of the accounting server (Range: 1 - 65535).
•
Default Configuration
The default value of the port number is 1813.
Command Mode
RADIUS (accounting) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets port number 56 for accounting requests.
434
RADIUS Commands