Ip Igmp Snooping Vlan Groupmembership-Interval - Dell Networking 7048 Reference Manual

Syntax
ip igmp snooping vlan
no ip igmp snooping vlan
vlan id — Number assigned to the VLAN.
•
Default Configuration
IGMP snooping immediate-leave mode is disabled on VLANs by default.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enables IGMP snooping immediate-leave mode on
VLAN 2.
console(config)#ip igmp snooping vlan 2 immediate-leave

ip igmp snooping vlan groupmembership-interval

This command sets the IGMP Group Membership Interval time on a VLAN.
The Group Membership Interval time is the amount of time in seconds that a
switch waits for a report from a particular group on a particular interface
before deleting the interface from the entry. This value must be greater than
the IGMPv3 Maximum Response time value. The range is 2 to 3600 seconds.
The no form of this command sets the IGMPv3 Group Membership Interval
time to the default value.
Syntax
ip igmp snooping vlan
no ip igmp snooping groupmembership-interval
vlan-id — Number assigned to the VLAN
•
496
IGMP Snooping Commands
vlan-id
immediate-leave
vlan-id
immediate-leave
vlan-id
groupmembership-interval
time